Electronics-native
Fixtures, shields, and housings for PCBA and smart hardware — not generic job-shop work.
Precision manufacturing
CNC machining for tight-tolerance hardware.
Multi-axis milling and turning for metals and engineering plastics.
±0.005mm
Typical tolerance
5-axis
Machining centers
100%
Dimensional inspection
24h
Prototype target
Why machine here
Electronics-focused machining with locked process control and in-house finishing.
Process locked before volume
First-article discipline, fixtures and inspection plans frozen before repeat production.
One-stop finishing
Anodize, plate, blast, and laser mark without bouncing parts across vendors.
Closed-loop QC
CMM and optical checks on every lot.
Capabilities
Multi-axis CNC with tight-tolerance work envelopes for prototype and volume runs.
Micron-level tolerances
Typical ±0.005 mm on critical features for electronics and semiconductor fixtures.
Multi-material expertise
Aluminum, stainless, brass, and engineering plastics including PEEK and POM.
Surface finishing
Anodizing, blast, plating, passivation, and laser mark as a one-stop flow.
100% inspection
CMM and optical measurement on every lot.
Machine park
Multi-axis mills, turning, mill-turn, and in-house inspection.
| Machine park | Feature | Qty |
|---|---|---|
| 5-axis mill Ø450 mm work envelope | Ø450 mm work envelope | 2 |
| 4-axis VMC XYZ 800 × 500 × 500 mm | XYZ 800 × 500 × 500 mm | 6 |
| Turning center Ø250 × 200 mm | Ø250 × 200 mm | 3 |
| Mill-turn Ø250 × 200 mm | Ø250 × 200 mm | 1 |
| CMM Programmable dimensional inspection | Programmable dimensional inspection | 1 |
| Optical / 2.5D Non-contact profile measurement | Non-contact profile measurement | 1 |
Typical capabilities
Typical process window. Tighter limits on request.
| Feature | Standard | Tight |
|---|---|---|
| Linear tolerance | ±0.05 mm | ±0.005 mm |
| Hole position | ±0.03 mm | ±0.01 mm |
| Surface finish | Ra 1.6 | Ra 0.4 |
| Max part size | 400 × 300 × 200 mm | On request |
| Min wall | 1.0 mm | 0.5 mm |
| Threads | M2–M16 | Helicoil / inserts |
Materials
Common grades for housings, fixtures, connectors, and wear parts.
Aluminum 6061 / 7075
Housings, heat sinks, jigs
Stainless 304 / 316
Fixtures and medical-device hardware
Brass & copper
Connectors, terminals
PEEK / POM / Nylon
Insulators, wear parts
Titanium
On request
Tool steel
On request
Finishing
In-house and qualified-vendor finishing in one flow.
Type II / III anodize
Clear, black, color
Sand / bead blast
Uniform matte
Electroless nickel
Wear and corrosion
Passivation
Stainless
Powder / wet coat
Color and corrosion protection
Laser mark / engrave
Logos, UID, QR
Industries we machine for
Precision hardware for aerospace, automotive, medical, and electronics.
Aerospace
Fixtures, brackets, and tight-tolerance hardware.
Automotive
Jigs, brackets, and low-volume metal parts.
Medical
ISO 13485 quality system for medical-device hardware.
Electronics
Shields, heat sinks, connector plates, and enclosure hardware.
Semiconductor
Fixtures, nests, and tight-tolerance tooling.
Automation
End effectors, rails, and machine frames for AGV and line work.
How we work
01
RFQ & DFM
Drawings in, manufacturability notes out. Typical quote in 1–2 days.
02
Prototype
First articles for fit and function. Typical turnaround 24–72 hours.
03
Process lock
Fixtures, tools, and inspection plan frozen before volume.
04
Volume + QC
Repeatable lots with 100% dimensional checks.
Featured parts
Representative parts from electronics, semiconductor, and automation programs.
Electronics
RF shield housing
Four-week prototype to a locked volume process.
- Material
- Al 6061-T6
- Tolerance
- ±0.01 mm
Semiconductor
Inspection nest
Optical datums and wear faces.
- Material
- PEEK
- Tolerance
- ±0.005 mm
Automation
Servo bracket
Mill-turn blank with tapped interfaces.
- Material
- SS 304
- Tolerance
- ±0.02 mm
Quality & metrology
Dimensional inspection from first article through outgoing lots.
CMM
Programmable dimensional reports on first article and lot samples.
Optical / 2.5D
Profiles, holes, and cosmetic edges without contact.
Incoming & outgoing
Material certs in, packed parts out with inspection data.
Traceability
Lot codes, travelers, and retained samples.
Systems
ISO 9001:2015IATF 16949:2016ISO 13485:2016ISO 14001:2015
Send a drawing
Send a 3D model and 2D drawing. We reply by email.
Accepted files
STEPIGESParasolidSolidWorksPDF + 2D
Include material, quantity, finish, and target date. Typical quote in 1–2 working days.
Workshop
Machining, inspection, and finishing on the shop floor.
FAQ
What quantities do you run?+
Prototypes from 1 pc, bridge runs in tens, volume in hundreds to low thousands.
Can you DFM my model?+
Yes — wall thickness, tool access, and datum advice come with the quote.
Do you machine plastics and metals in the same cell?+
Yes. Metals and engineering plastics, with dedicated controls for PEEK and medical work.
How do you handle export / NDA parts?+
NDA on request. Export documentation as required.
Is finishing in-house?+
A mix of in-house finishing and qualified vendors, managed as one flow.